ELECTROLOGY WRITTEN THEORY · NO EMAIL REQUIRED TO SAMPLE

Free Electrology Exam Practice Test

20 questions · every answer explained · no signup

Answer 20 explained nic national electrology written exam prep questions drawn from the free opening chapters of our electrology study book — no signup, all 20 with answers further down this page. Every answer shows the rule underneath so you stop guessing. Updated November 2026.

WANT LESSON 1 + FLASHCARDS TOO?

Create a free account anytime to jump straight into Chapter 1 & 2 lessons, audio memory hooks, and saved progress.

No credit card · Full 6-chapter course is $29 one-time
Electrology · Scientific ConceptsQuestion 1 of 20 · 0 answered

An item in ready storage has an uncertain processing history. What should happen?

ALL 20 QUESTIONS · ANSWERS & RATIONALES · CHAPTERS 1–2

Electrology Exam Practice Test: all 20 questions with answers

The same 20 questions as the test above, written out with every answer choice, the correct answer and the rule behind it. They come from the free opening chapters of the electrology course and are cited to the official bulletin or a primary reference where one exists; anything still awaiting a source check is marked (verify).

1. An item in ready storage has an uncertain processing history. What should happen?
  1. Assume the package proves every cycle
  2. Wipe it once and call it sterile
  3. Use it if the client agrees
  4. Remove it from ready status until the required process is resolved

Answer: Remove it from ready status until the required process is resolved

Appearance cannot supply missing processing evidence.

Source: California electrology infection-control rules, 16 CCR 982

2. Why is a device's numeric setting insufficient without a unit and context?
  1. Current, voltage and resistance describe different quantities
  2. Units only change the screen color
  3. A larger number always means a better treatment
  4. All numbers describe the same physical property

Answer: Current, voltage and resistance describe different quantities

Meaning depends on the quantity and device.

Source: physics

3. Two training diagrams label mechanisms: one shows only high-frequency heating and the other shows both direct-current chemical action and high-frequency heating. Which diagram represents blend?
  1. The second diagram
  2. Both are identical galvanic diagrams
  3. Neither can be interpreted without a client setting
  4. The first diagram

Answer: The second diagram

Blend includes both taught mechanisms, rather than heating alone.

Source: Sterex three modalities

4. A reusable item's processing log starts with a sterilization step, but notes that visible residue was not removed. Which prerequisite needs review?
  1. Increasing every device setting
  2. Calling the item single-use after reuse
  3. Changing the treatment modality
  4. Cleaning before the required process

Answer: Cleaning before the required process

Soil removal prepares the item; a later process name does not erase the prerequisite.

Source: CDC disinfection and sterilization glossary

5. In a classroom ohmic-resistor exercise, six volts is applied across three ohms. Using I = V/R, what is the current? This is not a treatment setting.
  1. One-half ampere
  2. Two amperes
  3. Two volts
  4. Eighteen amperes

Answer: Two amperes

Six divided by three is two; keep the unit amperes and do not apply this classroom example as a client parameter.

Source: physics

6. What distinction matters between a single-use probe and an eligible reusable item?
  1. Both are processed by advertising claims
  2. Every reusable item accepts any cycle
  3. Both can always be reused after drying
  4. They have different disposal or reprocessing workflows

Answer: They have different disposal or reprocessing workflows

Single-use designation is not changed by a quick cleaning.

Source: California electrology infection-control rules, 16 CCR 982

7. After completing facial epilation, an electrologist unscrews the used single-use probe from the probe holder. Which disposal action complies with OSHA bloodborne-pathogen sharps precautions?
  1. Slide the original plastic sleeve back onto the probe tip using both hands before walking it to a hallway bin.
  2. Bend the wire filament in half with gloved fingers so it cannot poke through a regular trash liner.
  3. Collect used probes on a paper towel beside the epilator and batch-transfer them at closing time.
  4. Place the contaminated probe immediately into an accessible, puncture-resistant, leak-proof, labeled sharps container without recapping or bending it by hand.

Answer: Place the contaminated probe immediately into an accessible, puncture-resistant, leak-proof, labeled sharps container without recapping or bending it by hand.

OSHA 29 CFR 1910.1030 prohibits bending, shearing, or two-handed recapping of contaminated needles/sharps and requires immediate placement into closable, puncture-resistant, leak-proof, labeled or color-coded sharps containers located easily accessible to the area of use.

8. In a theory calculation using the standard Units of Lye formula (tenths of a milliampere × seconds), an epilator delivers 0.4 mA of galvanic direct current for 5 seconds. How many units of lye are produced, and what duration delivers the same calculated units at 0.2 mA?
  1. 20 units of lye; at 0.2 mA, 10 seconds produces the same 20 units of lye.
  2. 40 units of lye; at 0.2 mA, 5 seconds still produces 40 units because time does not affect lye.
  3. 9 units of lye; tenths of a milliampere are added to seconds rather than multiplied.
  4. 2.0 units of lye; at 0.2 mA, 2.5 seconds produces the same 2.0 units of lye.

Answer: 20 units of lye; at 0.2 mA, 10 seconds produces the same 20 units of lye.

0.4 mA equals 4 tenths of a milliampere, and 4 × 5 seconds = 20 units of lye. Lowering intensity to 0.2 mA (2 tenths) requires 10 seconds (2 × 10 = 20 units) to yield the equivalent electrochemical dose.

(verify) Check this point against current official guidance before relying on it.

9. Why does high-frequency thermolysis with a properly inserted uninsulated needle coagulate tissue preferentially around the deep follicular bulb before heating the superficial stratum corneum?
  1. High-frequency alternating current requires alkaline sodium chloride decomposition that occurs only at skin-surface sebaceous pores.
  2. Current density concentrates at the probe tip (point effect) and preferentially heats moist deep follicular tissue rather than the drier, keratinized upper epidermis.
  3. Dry dead keratin conducts radiofrequency energy far better than hydrated vascularized dermal tissue.
  4. The probe shaft is coldest at its tip and hottest where it exits the plastic needle chuck above the skin.

Answer: Current density concentrates at the probe tip (point effect) and preferentially heats moist deep follicular tissue rather than the drier, keratinized upper epidermis.

Thermolysis relies on high-frequency dipole/ionic agitation in hydrated tissue combined with electrical point-effect concentration at the needle tip, producing a tear-drop or pear-shaped coagulation zone centered in the moist lower follicle.

10. What should substantiate a hair-removal outcome claim?
  1. Current official guidance and the specific device labeling.
  2. A similar device’s advertising without checking the actual labeling.
  3. A single client testimonial.
  4. A permanent-removal promise inferred from a general exam outline.

Answer: Current official guidance and the specific device labeling.

FDA device labeling can distinguish permanent hair reduction from total removal. An exam sample attribution does not establish a universal guarantee for every device or treatment.

11. An electrologist wipes down the treatment table and magnifying-lamp arm with an EPA-registered hospital disinfectant wipe and immediately dries the surface with a paper towel five seconds later so the next client can sit down. What error occurred?
  1. Wiping the disinfectant dry early prevented it from remaining visibly wet for the manufacturer’s required label contact time.
  2. Environmental work surfaces must be placed inside a dry-heat sterilizer oven between every appointment.
  3. EPA-registered hospital disinfectants only activate if mixed with household bleach at the chairside.
  4. Using single-use barrier film on epilator knobs permanently eliminates all treatment-table cleaning between clients.

Answer: Wiping the disinfectant dry early prevented it from remaining visibly wet for the manufacturer’s required label contact time.

CDC environmental-infection-control guidance stresses pre-cleaning visible soil and maintaining the EPA-registered disinfectant’s specified wet-contact time on noncritical surfaces; drying a surface prematurely interrupts microbial inactivation.

12. An electrology clinic processes reusable stainless-steel forceps in a steam autoclave. The external chemical indicator strip on each pouch turns dark, so a trainee proposes skipping routine biological spore testing. Why is the trainee’s reasoning flawed?
  1. A color change on external tape proves even overloaded, uncleaned instruments achieved guaranteed sterility.
  2. Chemical indicators work only in dry-heat ovens and never change color inside steam autoclaves.
  3. Biological spore indicators only clean organic debris off forceps before packaging.
  4. Chemical indicators verify exposure to heat or steam at the pack surface, whereas biological indicators use resistant bacterial spores to confirm actual sterilization lethality.

Answer: Chemical indicators verify exposure to heat or steam at the pack surface, whereas biological indicators use resistant bacterial spores to confirm actual sterilization lethality.

Per CDC sterilization definitions, chemical indicators monitor physical/chemical exposure parameters (helping separate processed from unprocessed packs), while biological indicators directly challenge the sterilizer with highly resistant spores to verify spore-killing performance.

13. What does blend combine?
  1. Galvanic and thermolysis currents.
  2. Stronger thermolysis alone.
  3. Two galvanic poles only.
  4. Laser plus wax.

Answer: Galvanic and thermolysis currents.

Chemical and thermal effects are combined. The name does not guarantee superiority for every follicle or client.

14. Do disposable probes remove the processing requirements for other instruments and surfaces?
  1. Yes, if the room looks tidy.
  2. No.
  3. Yes, all other cleaning becomes optional.
  4. Yes, if no blood is visible.

Answer: No.

Disposable probes do not eliminate the requirements for other instruments, equipment and surfaces.

15. Why is cleaning needed before the required disinfection or sterilization process?
  1. It sterilizes every item without further processing.
  2. It leaves a coating that replaces disinfectant.
  3. It is needed only after sterilization, never before.
  4. It removes soil and microorganisms that can interfere with further processing.

Answer: It removes soil and microorganisms that can interfere with further processing.

Cleaning, disinfection and sterilization have distinct endpoints. Choose the required compatible processing for the particular item; do not assume every object needs every process.

16. What distinguishes galvanic electrolysis from thermolysis?
  1. Mechanical plucking alone.
  2. Light targeting melanin.
  3. Direct-current chemical action rather than high-frequency heating.
  4. Alternating-current heat only.

Answer: Direct-current chemical action rather than high-frequency heating.

Sterex describes galvanic lye action. This mechanism distinction is not a general instruction to increase current or time, and an exam sample does not prove either variable alone can never affect production.

17. Midway through an upper-lip electrolysis session, the practitioner notices a small snag tear in the index fingertip of a disposable examination glove. What is the required infection-control sequence?
  1. Pull a second glove directly over the torn contaminated glove at the end of the day for the next client.
  2. Pause treatment, remove and discard the gloves, perform hand hygiene, and don a fresh pair of single-use examination gloves before resuming.
  3. Wipe the torn gloved fingertip with 70% isopropyl alcohol and finish the remaining ten minutes of treatment.
  4. Wash the disposable gloves with antibacterial liquid soap at the sink, dry them, and continue treating.

Answer: Pause treatment, remove and discard the gloves, perform hand hygiene, and don a fresh pair of single-use examination gloves before resuming.

Under OSHA 29 CFR 1910.1030(d)(3)(ix)(A) and (d)(2)(v), disposable single-use gloves must be replaced as soon as practical when contaminated or torn/punctured, must never be washed or decontaminated for reuse, and require hand hygiene upon removal.

18. According to Ohm’s law (I = V / R), if applied potential difference (V) remains constant while electrical resistance (R) drops as a probe moves from dry keratinized epidermis into moist deeper tissue, how does current (I) respond conceptually?
  1. Current increases inversely as resistance decreases when voltage is held constant.
  2. Resistance and current are measured in megahertz and always rise together.
  3. Voltage automatically converts direct current into radiofrequency alternating current.
  4. Current drops to zero because lower resistance blocks electron movement.

Answer: Current increases inversely as resistance decreases when voltage is held constant.

Ohm’s law (I = V / R) states that electric current is directly proportional to potential difference and inversely proportional to resistance; decreasing resistance under constant voltage increases current flow.

19. During room turnover, an electrologist sorts a newly opened epilation probe, reusable metal forceps that contact follicular openings with pinpoint exudate, and an intact-skin armrest cushion. Under the CDC Spaulding framework, which item category requires full sterility before tissue contact?
  1. Only items visibly coated with dried blood, while clean-looking probes require low-level disinfection only.
  2. All three items equally, because Spaulding assigns one identical processing level to furniture and needles.
  3. Critical items that enter sterile tissue or the vascular system, which must be sterile at use.
  4. Noncritical environmental cushions that contact only intact skin, which require steam autoclaving between clients.

Answer: Critical items that enter sterile tissue or the vascular system, which must be sterile at use.

CDC Spaulding classification divides items by infection risk: critical items enter sterile tissue or vasculature and must be sterile; semicritical items touch mucous membranes or nonintact skin; noncritical surfaces touch intact skin and require cleaning plus appropriate disinfection. State electrology regulations also specify sterilization rules for reusable forceps and probe caps.

20. When does the OSHA Bloodborne Pathogens standard apply?
  1. To covered employers with occupationally exposed employees.
  2. Only to businesses that choose to use a sharps container.
  3. Automatically to every self-employed person regardless of coverage.
  4. Only after an employee has already acquired an infection.

Answer: To covered employers with occupationally exposed employees.

The standard sets occupational duties. CDC guidance, applicable state rules and equipment instructions also matter; do not confuse the source of a rule with its coverage.

READY FOR THE FULL STUDY LOOP?

Open Lesson 1 of NIC National Electrology Written Exam Prep free

Read the chapter, hear the memory hooks, flip flashcards, and fix misses in the exact book section. First 2 modules are free; full access to all 6 chapters, 111 practice items, and 2 reserved forms is $29 one-time.

Read the free Electrology study guide →